R5 Wearable BT RFID Reader - เครื่องอ่าน RFID bluetooth

Download Datasheet

R5 Wearable BT RFID Reader
Robust RFID Reading and Writing

Physical Characteristics
Dimensions:             108 mm × 78 mm × 18 mm
Weight:                  200 g / 7.05 oz.
Battery:                  2000 mAh (removable)
Keypad:                  ON/OFF, SCAN
Indicator LED:           Red indicator will be ON when charging
                             Green indicator will be ON when device has been fully charged
                             Blue indicator will be ON when battery is higher than 20%
                             Blue indicator will flash when battery is lower than 20%
                             Bluetooth is not paired when bluetooth indicator is OFF
                             Bluetooth is paired when bluetooth indicator is ON
Port:                       USB Type C
Charging Current:      5 V / 1.5 A
Charging Duration:     2 hours

Communication:         
Bluetooth:                Bluetooth Low Energy (BLE) 5.0
USB Type C:             USB connection to realize data transfer

Developing Environment
SDK:                       Android / iOS SDK Supported
Security:                  RFID Encrypted Module (Reserve)

User Environment
Operating Temp.:       -20 °C to +50 °C
Storage Temp.:          -40 °C to +70 °C
Humidity:                 5% RH - 95% RH non condensing
Drop Specification:    1.2 m dropping on concrete
Sealing:                   IP65

UHF RFID
Engine:                   CM710-1 module based on Impinj E710
                            CM2000-1 module based on Impinj Indy R2000
Frequency:              920-925 MHz / 902-928 MHz / 865-868 MHz
Protocol:                 EPC C1 GEN2 / ISO18000-6C
Antenna:                 Circular Polarized Antenna (3dBic)
Power:                    1W (30dBm, support +5~+30dBm adjustable)
2W Optional (33dBm, for Latin America, etc.)
Fastest Read Rate:     900+ tags/sec
Max Read Range:      Impinj E710 chip:
                             11m (Impinj MR6 tag, size 70 x 15mm)
                             12m (Impinj M750 tag, size 70 x 15mm)
                             14m (Alien H3 Anti-Metal tag, size 130 x 42mm)

                             Impinj R2000 chip:
                             11m (Impinj MR6 tag, size 70 x 15mm)
                             8m (Impinj M750 tag, size 70 x 15mm)
                             9m (Alian H3 Anti-Metal tag, size 130 x 42mm)
Note: * Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment.

Optional Accessories
Accessories:             Wrist strap, arm strap, magnetic handle